Maker Camp is funded in part by the Gordon and Betty Moore Foundation and the generous support of the Members of Make: Community.
2 Hours depending on the garden size
TO COMPLETE
WHAT WILL YOU MAKE?
WHAT WILL YOU NEED?
- 3/4 inch PVC to fit the garden
- Assortment of 3/4 inch fittings, T and + shaped
- 3/4 inch PVC end caps
- 3/4 inch PVC-to-garden-hose adapter
- Marker
- PVC cutter or saw
STEP 1
Lay out your garden
Start by making a plan of your garden. I used Sketchup but you could easily just use pen and paper. Lay out how you would like your watering system to fit, then go buy the PVC supplies you will need.
Lay the pipes on the ground to see how it will all fit together after you buy them.
STEP 2
Measure and cut
Measure any of the lengths of PVC that need to be trimmed, and then cut them to fit.
STEP 3
Add end caps
Any ends of your pipe that will not fit into couplings should be capped off to prevent the water from spilling out at those points. Push the caps onto the ends to secure them. On the end where you will connect your hose, add the hose adapter fitting.
STEP 4
Drill water holes
Using an 1/8-inch bit, drill holes in one side of your PVC pipes to allow water to escape. Try to uniformly space the holes for even watering.
STEP 5
Assembly
Begin pushing all the pipes into their fittings to build your final structure. Make sure all of the watering holes that you drilled are facing down into the dirt.
WHAT'S NEXT?
This system will be better for your garden than a normal sprinkler because it delivers the water where the plants need it — to the roots. Sprinklers soak the leaves, which wastes water (plants don’t drink through their leaves!) and can cause rot and damage. To help improve the system, you could add a timer to ensure the water comes on everyday. How about a sensor that waters your garden when it gets too dry? Instead of using the hose, you could install a rain barrel to collect rain from your home’s gutters and use that water to irrigate your garden.
Please Note
Your safety is your own responsibility, including proper use of equipment and safety gear, and determining whether you have adequate skill and experience. Power tools, electricity, and other resources used for these projects are dangerous, unless used properly and with adequate precautions, including safety gear and adult supervision. Some illustrative photos do not depict safety precautions or equipment, in order to show the project steps more clearly. Use of the instructions and suggestions found in Maker Camp is at your own risk. Make Community, LLC, disclaims all responsibility for any resulting damage, injury, or expense.
ALL DONE? SHARE IT!
Share pictures and videos of your cool build! Be sure to use #maketogether or #makercamp
POST YOUR PROJECTSKits and Books From Maker Shed
Make: produces a variety of great products and helpful project tutorials to enhance your making experience.
