Maker Camp is funded in part by the Gordon and Betty Moore Foundation and the generous support of the Members of Make: Community.
FEW HOURS
TO COMPLETE
WHAT WILL YOU MAKE?
WHAT WILL YOU NEED?
- cardboard (or plywood)
- fishing line
- paints
- light fixture
STEP 1
Cut the base
Cut a cloud or a sun out of the cardboard or plywood. Diameter approximately 30 cm or 1 foot.
Cut a hole in the middle of the base for your light fixture cable.
Use a needle to make holes around the edges for the fishing line.
STEP 2
Add butterflies
Cut and paint butterflies.
Approximately 15 butterflies different shapes are fine each about 6x4cm or 2×1.5inches each.
WHAT'S NEXT?
See the Butterfly Chandelier project video:
https://www.youtube.com/watch?v=QVEhl1giObg
See more projects by Zrób Zobie Coś
Youtube:
https://www.youtube.com/watch?v=hgyluH6noE4&fbclid
Facebook:
Zrób Sobie Coś
Please Note
Your safety is your own responsibility, including proper use of equipment and safety gear, and determining whether you have adequate skill and experience. Power tools, electricity, and other resources used for these projects are dangerous, unless used properly and with adequate precautions, including safety gear and adult supervision. Some illustrative photos do not depict safety precautions or equipment, in order to show the project steps more clearly. Use of the instructions and suggestions found in Maker Camp is at your own risk. Make Community, LLC, disclaims all responsibility for any resulting damage, injury, or expense.
ALL DONE? SHARE IT!
Share pictures and videos of your cool build! Be sure to use #maketogether or #makercamp
POST YOUR PROJECTSKits and Books From Maker Shed
Make: produces a variety of great products and helpful project tutorials to enhance your making experience.
